Extended data storage

instant read and write data


Imagine that you can read 2 terabyte in one second.
Imagine that its not based on electromagnetism,
thus it is stored permanently.

Imagine the reader has no moving parts,
So its useable in good and harsh conditions.

Imagine that it can be used
for an operating system with vast possiblities.

This new method of data storage
is based on an optical system.

As we use dvd with laser.
This system is built on the laser
technology.

Imagine you have a tube made of fiber alloy and
particles of glass and sapphire.

In a printer, the fiber is mixed with glass,
and sapphire as the shell.

The tube is 12 centimeters,
and 4 centimeterds diameter.

in a reader, a couple of lasers is mounted at a bottom, and mirrors are
giving the rays to the full height of the tube.

With four rays, the full tube can be read; in a second.
because its optical and both bottom and top of the tube is used,
as well the in between.

A new storage for terabytes of data.
With the use of permanent storage.


To further describe.

It is a tube of alloy, sapphire and glass.
A tube 12 cm long and round 4 cm.

The reader is one vertical laser,
becouse the round and 12 cm long.
the tube standing.

Three other lasers,
two intersecting,
thus creating double photon place.
and the third to read the data.

The benefit is,
the tube is longlasting material
with no electromagnetic.

The second is, because an alloy,
and the use of both lasers as well mirros.
it can be used for dataretrieval of
2 terabytes in very short time.

as it doesn;t need to spin for a dvd,
to be read and stored.

And the tube, can because of its size
also used for storing a operation system.
Because as we know, an operation system
consists of nine out of ten, permanent stored
source.

When you would by a tube with data,
a box of 15 by 10 cm would arrive on your doormat.

The technology

like mriscanner,
the intersection of waves is used.
and the third laser, to create a shadowlike figure
made to read out data.

The vertical laser,
if all lasers have a lightray of very small
focal point.

The technology based on this,
can make the lasers hard wired,
implemented to be activated,
like you read on a screen,
without the screen needing moving parts.